• NETLink® USB Compact Необходим е само програмиращ кабел за S7-200, S7-300 и S7-400 контролери. Включва се директно към S7 CPU и PC посредством 3m USB кабел. NetLink USB Compact се захранва от USB шината и поддържа протоколи Fullspeed (12 Mbps) и Highspeed (480 Mbps). Устройството може да се използва за програмиране и визуализация със скорост на MPI/Profibus до 12 Mbps автоматично определяне скоростта на трансфер и поддържа до 32 връзки. Посредством два LED се следи статуса . Поддържа всички Simatic® инженерни приложения.

  • NETLink® USB Highspeed USB Gateway The NETLink® USB for programming, projecting and visualization of Siemens S7 PLCs may be connected to any MPI/PROFIBUS interface of the bus system. NETLink® USB is powered from the USB bus, but also features an optional 24 V DC power supply. The cable connection is 1.2 m long and is designed as active line and thus represents no influence on the MPI/PROFIBUS. The integrated PG socket permits connection of further devices. The connection to the PC is established with the included 3-m-high-speed USB cable. NETLink® USB allows full transmission speed up to 12 Mbps to MPI/PPI and PROFIBUS. Baud rate is detected automatically and communication to further passive participants on the bus is possible. At the USB end the protocols Fullspeed (12 Mbps) and Highspeed (480 Mbps) are supported. The supplied driver automatically embeds in the Simatic* Engineering Tools. The MPI/PPI/PROFIBUS is electrically isolated from the external 24 V DC power source and from the USB interface (functional separation). Furthermore, you can perform diagnostic and configurations with the supplied SHTools software. A free download of the latest SHTools version is available on our download area. Thus, additional functions can be updated at every time on your own.

  • NETLink® SLOT USB The NETLink® SLOT USB is an alternative to a PROFIBUS-CP plug-in board and is directly installed in the computer (industrial PC, panel PC, etc.). It is connected to the programmable controller by means of a standard PROFIBUS connection. Connection to the USB bus is possible directly from the mother board using the cable supplied. The necessary 5 volts are also provided through this connection. Moreover, a direct connection from the computer power supply unit can be used for the power supply. As an alternative, complete connection of the NETLink® SLOT USB is also possible through an external USB cable. The NETLink® SLOT USB permits programming or visualization from a USB interface on up to 32 simultaneous MPI/PPI/PROFIBUS connections with the full transmission rate of 12 Mbps. The NETLink® SLOT USB features automatic baudrate detection and supports the USB protocols Fullspeed (12 Mbps) and Highspeed (480 Mbps). The MPI/PPI/PROFIBUS is electrically isolated from the PC power supply and from the USB interface (functional isolation). The firmware can always be updated using the free of charge update program SHTools without any problem.